Metal testing you can put a certificate behind.
Rawnat Testing LLP runs chemical composition, metallurgical, hardness and universal testing to the standards your material specification actually demands — so the report closes the question, not opens another one.
NABL accredited
Testing performed under a recognised quality framework.
Calibrated instruments
Digital & Brinell hardness testers, spectrometer, UTM.
Ferrous & non-ferrous
Composition and mechanical testing across metal grades.
Standard-referenced reports
Results issued against the IS / ASTM method you specify.
Built for fabricators, foundries and manufacturers who can't afford a wrong number.
Rawnat Testing LLP (RTL) is a NABL accredited metal testing laboratory based in Faridabad, set up to give local industry — fabrication shops, foundries, forging units and manufacturers — direct access to lab-grade material verification without routing samples out of the region.
The lab covers the four tests that decide whether a batch of metal is fit for purpose: chemical composition to confirm grade, metallurgical examination to check microstructure and process history, hardness testing on digital Rockwell Hardness Tester and Brinell Hardness testers, and universal testing for tensile strength, bend and elongation.
Every sample is logged, tested against the referenced standard, and reported with the method, equipment and reviewer on record — so the certificate holds up wherever it's presented.
Four test disciplines, one report.
Each service runs on calibrated equipment against the standard specified by your client, drawing or purchase order.
Chemical Composition Analysis
Elemental analysis of ferrous and non-ferrous metals to confirm grade and detect deviation before it becomes a production problem.
Metallurgical Testing
Microstructure examination, grain size and inclusion assessment to verify heat treatment, casting and process quality.
Hardness Testing
Surface and bulk hardness on digital hardness testers and Brinell hardness testers, reported in HRC, HV or HBW as required.
Universal Testing (UTM)
Tensile strength, yield point, bend and percentage elongation on a universal testing machine, per applicable material standard.
Sample in, certificate out.
A fixed sequence keeps every job traceable from receipt to signed report.
Sample receipt
Sample logged, photographed and assigned a unique job ID.
Method selection
Standard confirmed with you — IS, ASTM or client-specified.
Testing
Test run on calibrated equipment by a qualified technician.
Review
Results checked against tolerance and reviewed for sign-off.
Report issued
Certificate issued with method, equipment and result on record.
Rahul Tanwar
Rahul Tanwar founded Rawnat Testing LLP in 2024 to put a properly accredited metal testing lab within reach of Faridabad's fabrication and manufacturing units — instead of samples travelling out of the region for a routine composition or hardness check.
The lab is run on a simple rule: no test leaves the floor without the method, equipment and reviewer recorded against it, because a certificate is only useful if it holds up under scrutiny.
Send a sample or ask about scope.
Reach the lab directly by phone or email, or find us at the Sector-23 facility.
Near Vijay Dharamkanta, Sector-23, Faridabad – 121005